Portable Digital Indicator – PSDS

  • LCD display 128 x 64 pixels with backlight
  • Input signal range up to ± 1000 mV/V
  • Microprocessor based with single pass calibration
  • Up to 6 calibration ranges
  • Robust self sealing IP67 enclosure
  • Powered by 2 x AA internal batteries or USB
  • Average battery life - 60 hours
  • Easy to carry, weighs only 350grams.

Weighing Indicator VT 100

  • Ideal for general purpose weighing applications
  • 30 samples per second
  • Approved to OIML R 76 10,000d
  • Can drive up to 8 off 350 Ohm load cells wired in parallel
  • Very large 6 digit LED display, 20.3 mm digit height
  • RS232 computer port, 9600 to 38400 baud
  • Printer port 1200 to 9600 baud, current loop
  • Supply voltage 9 V DC or 220 VAC with mains adaptor
  • Desk/Wall mounted ABS housing

SensorData Easy

  • High performance weight indicator
  • 1600 samples per second, 24 bit ADC 0.4uV/div
  • High resolution 2.8 inch colour TFT screen.
  • Compact aluminium housing for panel mounting
  • 3 Digital Inputs and 4 Digital Outputs as standard
  • Ethernet, Ethernet IP & USB interface.
  • Can drive up to 8 off 350 Ohm load cells
  • Calibration possible without weights
  • Optional RS232/422/Canbus/Profibus interfaces
  • Optional Analogue Output
  • Supply voltage 18-32V DC 7.5W max.

Weighing Indicator 1020

  • High performance weight indicator
  • 1600 weight samples per second at 24 bit resolution
  • USB and Ethernet Interfaces as standard
  • Profibus, CANbus and RS232/485 optional interfaces
  • 3 Logic Inputs for electrical remote control
  • 4 Logic Outputs with solid state relays
  • Optional Analogue Output 0/4 - 20 mA
  • Robust aluminium housing with screw terminals

Check weighing controller 1020 CK

  • Designed for use with in-line check-weighers
  • 1600 weight samples per second at 24 bit resolution
  • USB and Ethernet Interfaces as standard
  • Profibus, CANbus and RS232/485 optional interfaces
  • 3 Logic Inputs for electrical remote control
  • 4 Logic Outputs with solid state relays
  • Optional Analogue Output 0/4 - 20 mA
  • Robust aluminium housing with screw terminals

Filling Controller 1020 MV

  • Designed for two stage, single component filling
  • 1600 samples per second, 24 bit ADC
  • High resolution 2.8 inch colour TFT screen
  • Can drive up to 8 off 350 Ohm load cells
  • 3 Digital Inputs and 4 Digital Outputs as standard
  • Ethernet and USB interfaces included
  • Optional RS232/422/485/Canbus/Profibus interfaces
  • Optional analogue output 0/4 ... 20 mA

Programmable Weighing Controller FLEX

  • Configurable 5.7 inch colour TFT touch screen
  • High speed ADC, 1600 samples per second
  • Unique digital filters with special Dynamic settings
  • Ideal for filling/dosing & check weighing applications
  • 16 Digital Logic Inputs optically isolated
  • 20 Digital Logic Outputs optically isolated
  • Expandable up to 60 Inputs/Outputs in same housing
  • RS232/422/485/Ethernet/USB/CAN-bus interfaces
  • Fully programmable using free PI software

Programmable Weighing Controller Flex 2100

  • Configurable 5.7 inch colour TFT touch screen
  • High speed ADC, 1600 samples per second
  • Unique digital filters with special Dynamic settings
  • Ideal for filling/dosing & check weighing applications
  • 8 Digital Logic Inputs optically isolated
  • 8 Digital Logic Outputs optically isolated
  • RS232/422/485/Ethernet/USB/CAN-bus interfaces
  • Panel Mounted, Supply Voltage 100-240 VAC or 24 VDC
  • Fully programmable using free PI software

Programmable Weighing Controller Flex 2100 SS

  • Configurable 5.7 inch colour TFT touch screen
  • High speed ADC, 1600 samples per second
  • Unique digital filters with special Dynamic settings
  • Ideal for filling/dosing & check weighing applications
  • 8 Digital Logic Inputs optically isolated
  • 8 Digital Logic Outputs optically isolated
  • RS232/422/485/Ethernet/USB/CAN-bus interfaces
  • Stainless steel enclosure, wall or desk mounted
  • Fully programmable using free PI software
Weighing Controller Flex 2100-SS